Dell S4048T User Manual

Feature and
Functionality
Dell Networking OS
Release Introduction
Documentation and
Chapter Location
S4048–ON
Command Line
Reference Guide.
OSPF for IPv6 (OSPFv3) 9.7.(0.1) OSPFv3 in the Dell
Networking OS
Command Line
Reference Guide.
Equal Cost Multipath for
IPv6
9.7.(0.1)
IPv6 Services and
Management
Telnet client over IPv6
(outbound Telnet)
9.7.(0.1) Configuring Telnet with IPv6
Control and Monitoring
in the Dell Networking
OS Command Line
Reference Guide.
Telnet server over IPv6
(inbound Telnet)
9.7.(0.1) Configuring Telnet with IPv6
Control and Monitoring
in the Dell Networking
OS Command Line
Reference Guide.
Secure Shell (SSH) client
support over IPv6
(outbound SSH) Layer 3
only
9.7.(0.1) Secure Shell (SSH) Over an IPv6 Transport
Secure Shell (SSH) server
support over IPv6
(inbound SSH) Layer 3
only
9.7.(0.1) Secure Shell (SSH) Over an IPv6 Transport
IPv6 Access Control Lists 9.7.(0.1) IPv6 Access Control Lists
in the Dell Networking
OS Command Line
Reference Guide.
IPv6 Multicast
MLDv1/v2 9.7.(0.1)
IPv6 PIM in the Dell
Networking OS
Command Line
Reference Guide.
IPv6 Routing 526

Dell S4048T Specifications

General

Switching Capacity	1.44 Tbps
Rack Units	1U
Form Factor	Rack-mountable
Power Device	Internal power supply
Power Redundancy	Optional
Product Type	Switch
Jumbo Frame Support	Yes
Routing Protocol	OSPF, BGP, RIP, VRRP, PIM-SM, IGMP
Remote Management Protocol	SNMP, RMON, Telnet, SSH
Features	Quality of Service (QoS), Jumbo Frames Support, Virtual Route Redundancy Protocol (VRRP), VLAN support, sFlow, Multiple Spanning Tree Protocol (MSTP), Rapid Spanning Tree Protocol (RSTP), IPv6 support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ae
Dimensions (W x D x H)	17.3 in x 16 in x 1.7 in
Operating Temperature	0°C to 40 °C
Operating Humidity	10% to 90% (non-condensing)