Dell S4048T - Page 618

Type SubType TLV Description
127 3 Location Identification Indicates that the physical
location of the device
expressed in one of three
possible formats:
• Coordinate Based
LCI
• Civic Address LCI
• Emergency Call
Services ELIN
127 4 Location Identification Indicates power
requirements, priority,
and power status.
Inventory Management
TLVs
Implementation of this
set of TLVs is optional in
LLDP-MED devices. None
or all TLVs must be
supported. Dell
Networking OS does not
currently support these
TLVs.
127 5 Inventory — Hardware
Revision
Indicates the hardware
revision of the LLDP-MED
device.
127 6 Inventory — Firmware
Revision
Indicates the firmware
revision of the LLDP-MED
device.
127 7 Inventory — Software
Revision
Indicates the software
revision of the LLDP-MED
device.
127 8 Inventory — Serial
Number
Indicates the device serial
number of the LLDP-
MED device.
127 9 Inventory —
Manufacturer Name
Indicates the
manufacturer of the
LLDP-MED device.
127 10 Inventory — Model Name Indicates the model of
the LLDP-MED device.
127 11 Inventory — Asset ID Indicates a user specified
device number to
manage inventory.
127 12–255 Reserved —
Link Layer Discovery Protocol (LLDP) 618