Instructions for Use Fabius MRI SW 3.n 143
Configuration
Alarm Limits
z Select and confirm the »Alarm Limits« label on
the Standby Setup screen. The Default Alarm
Limits window appears.
z Select the alarm limit value that needs to
change.
z Confirm the alarm limit value and select a new
value. (In the example illustration, the O
2 alarm
limit was changed from »20« to »25«.)
z Confirm the new value for the O2 alarm limit.
The new alarm limit is saved and cursor moves
to the return arrow.
z If necessary, repeat the process for the other
parameter alarm limits.
NOTE
Set the alarm limits to appropriate values.
To Next Page
Loading...
