Dräger Fabius User Manual

Configuration
144
Instructions for Use Fabius MRI SW 3.n
The adjustment range and factory default values for
all alarms on the Fabius MRI are shown in the fol-
lowing table.
Alarm Volume
z Select and confirm the »Alarm Volume« label
on the Standby Setup screen. The current alarm
volume value appears on the screen.
z Select and confirm the new alarm volume value
from 1 (minimum) to 10 (maximum)
(range: >45 dB(A) to <85 dB(A)).
In the example illustration, the value was changed
from »4« to »5«.
The Alarm Volume Setting window is then removed
from the screen, and the cursor returns to the return
arrow.
Alarm
Parameter
Adjustment
Range
Factory
Default Value
O
2
%
19 to 100
18 to 99
100
20
MV
L/min
0.1 to 20.0
0.0 to 19.9
12.0
3.0
Pressure
cmH2O
(hPa)
10 to 70
5 to 30
40
8
540
539

Dräger Fabius Specifications

General

Type	Anesthesia Workstation
Display	Color TFT
Gas Supply	O2, N2O, Air
CO2 Absorber	Yes
Manufacturer	Dräger
Model	Fabius
Ventilation Modes	SIMV
Inspiratory Time	0.2-5 s
PEEP	0 to 20 cmH2O
Vaporizer Mounts	2
O2 Flow	0 to 15 L/min
Air Flow	0 to 15 L/min