Instructions for Use Fabius MRI SW 3.n 149
Configuration
Time Format
z Select and confirm the »Time Format« label on
the Standby Setup screen. The Time Format
window appears next to the label.
z Select and confirm the new time format value
(in the example illustration, the value was
changed from »24 Hour« to »AM/PM«).
The new time format value is saved, the Time For-
mat window is removed from the screen, and the
cursor returns to the »Time Format« label.
Date Set
The values that can be selected are two-digit
numerical values for day, month, and year.
Use the procedure described in “Time Set” on page
148 to change the date parameter.
To Next Page
Loading...
