Dräger Fabius - Page 150

Configuration
150
Instructions for Use Fabius MRI SW 3.n
Date Format
The values that can be selected for the date format
are »MM-DD-YY« or »DD-MM-YY«.
Use the procedure described in “Time Format” on
page 149 to change the date format parameter.
Acoustic Confirmation
The values that can be selected for the acoustic
confirmation are »On« or »Off«.
If »On« is selected, an acoustic confirmation is
annunciated every time that the rotary knob is
pressed.
Use the procedure described in “Time Format” on
page 149 to change the acoustic confirmation
parameter.
Alarm Tone Sequence
The values that can be selected for the alarm tone
sequence are »Standard« or »Dräger«.
Use the procedure described in “Time Format” on
page 149 to change the alarm tone sequence
parameter.
549
550
551