dtec DYNertia3 - Display; Multiple Monitor Support; Hide Windows Desktop; Data Window Transparency

www.dtec.net.au
33
Chapter 4: ‘Setup’ Menu Options
Software- Setup Menu (cont.)
Display
Multiple Monitor Support: DYNertia3 can display its data across two
monitors, this allows comfortably analysing large amounts of data. You
can select what monitor displays the main Graph Window or other
selected Windows.
Hide Windows Desktop: Resets Windows ‘desktop’ for an attractive
‘backdrop’ when DYNertia3 is running. This can be used for
applications were the PC screen size/resolution cannot be set to
exclude the background.
Note: DYNertia3 is a fixed sized Window and cannot be enlarged (‘maximised’) to fill the whole screen, set the screen
resolution for best appearance.
Data Window Transparency: Sets the transparency level of the ‘floating’ data box that is used in several analysis
screens & also the main Graph Window. ‘Transparent’ menu then controls the function from within the data box!
The ‘floating’ data box shown is usually displayed by ‘Right’ clicking on the Right hand scales of a graph or screen
Screensaver: Disables screen saver to prevent it from interfering with DYNertia3 software, for example if it turns on
and you are in the vehicle ready to test, you may need to get out and reset (e.g. if you had no keyboard in the vehicle).
About
Display of System Details: Displays Firmware version, hardware
version, copyright information and what options are enabled.