www.dtec.net.au
Chapter 8: Loading / Viewing Files
Secondary GRAPH Window
To allow the viewing and Analysing of up to 10 trace sets there can be opened a second Graph screen. This appears
very similar to the main Graph screen but has limited menu options as it is for selecting, viewing and printing, not
controlling dyno functions.
This second Graph screen can display 5 traces; it is ideally suited to PC’s with dual monitors connected as can then
reside on the second screen
It is loaded with files the same way the main screen is, via a ‘Click’ on a trace number (numbered buttons beside each
coloured band).
All controls and menu functions are the same as the main Graph screen so will not be covered here.
To Next Page
Loading...