www.dtec.net.au
Chapter 7: Weather Corrections
If weather data causes excessive correction then a warning will appear and runs will be
prohibited until values entered reduce the correction factor within range.
Viewing Weather Data
Allows the viewing of the weather data from the optional DTec ‘Weather Watch’ automatic weather station. Ensure it is
connected and configured to a PC USB port via “Setup/Communication”.
In the menu option “Utilities/Current Weather Data” you can view the live data from the optional ‘Weather Watch’ station
including RAD (Relative Air Density).
The chart speed can be adjusted to suit your monitoring requirements with the ‘Chart Speed’ control.
Tip- The Relative Air Density (RAD) is also displayed for tunning purposes and can be recorded as a reference. Please
see the ‘Weather Watch’ documentation for more information on RAD and other ‘stand alone’ tuning features.
The ‘RAD Reference’ button saves the current RAD at the time it is pressed so any changes, and therefore air/fuel
mixture changes, are easily noted.
To Next Page
Loading...
Need help?
General