F 54 7
1.2 Points of maintenance
Engine fuel tank (1)
- Check the filling level on the gauge
on the operating panel.
A
Fill the fuel tank each time before start-
ing work so that the fuel system cannot
"run dry" and time-consuming venting
(bleeding) can therefore be avoided.
m
Observe the instructions for fuel recom-
mendations and the specification in the chapter on "Lubricants and operating sub-
stances"!
Danger from ultra low-sulphur diesel
Ultra low-sulphur diesel (ULSD) poses a greater risk of
combustion from static electricity than earlier grades of die-
sel that contained more sulphur. An explosion or combus-
tion can cause severe to fatal injuries !
- When refuelling vehicles, always ensure that the fuel
pump is earthed with equipotential bonding to the vehi-
cle.
- When a fuel pump has correct equipotential bonding,
there is a continuous electrically conductive connection
between all components of the fuel pump and the vehi-
cle being refuelled.
- Contact your fuel supplier or the supplier of your refuel-
ling system to ensure that the fuel pump complies with
the currently valid refuelling standards and that correct
earthing and equipotential bonding is warranted.
To Next Page
Loading...
Need help?
General
