Dynapac SD2500C - 2.1 Drive engine error codes

D 21 26
2.1 Drive engine error codes
If a fault has been detected on the drive engine, this is indicated by the corresponding
warning lamp (1) / (2) and appears at the same time as a warning message in the
display.
The error message that can be called up
in the display contains several numerical
codes, which uniquely define the fault af-
ter decoding.
- Display "Engine fault" (3) indicates
that there is a fault on the drive engine.
m
It may be possible to continue operating
the vehicle, depending on the severity of
the error. The error should however be
remedied quickly to prevent further dam-
age.
A
Severe errors in the drive engine result
in the engine stopping automatically to
prevent further damage.
- After confirming the display, the nu-
merical codes appear in the corre-
sponding error list (4).
STOP
2
1
3
4