Dynapac SD2500C - Set-up menu Terminal settings; System menu - Basic settings display

D 21 24
Set-up menu
"Terminal settings"
- (1) Button day time bright-
ness (%) display and ad-
justment parameters
- (2) Button night time bright-
ness (%) display and ad-
justment parameters
A
Setting range 0-100%
A
When the working lights are
switched on, the system au-
tomatically switches to the
night time operation settings.
- (3) "Beep" display and adjustment parameters - warning signal for error messages
until the error has been acknowledged.
- "beep" ON:
parameter 1
- "beep" OFF:
parameter 0
A
Press button (D) to call up the system menu.
System menu -
"Basic settings"
display
- (1) Language display and
adjustment parameters
- (2) Time display and ad-
justment parameters (hh-
mm)
- (3) Date display and adjust-
ment parameters
(DD-MM-YYYY)
- (4) Monitor brightness dis-
play and adjustment pa-
rameters
- (5) Button brightness dis-
play and adjustment parameters
A
The display brightness is adjusted directly, the buttons light up briefly to check.
1 2
3
D
1
E
2
3
4
5