C 11 4
3 Securing the load
A
The following instructions for securing the load on the low-bed trailer consist merely
in examples of how to secure the load correctly.
A
Always comply with the local regulations for securing the load and for correct use of
load securing equipment.
A
Normal driving mode also includes emergency braking, evasive manoeuvres and
poor road surfaces.
A
Use should be made of the different methods available for securing loads (positive fit,
force connection, diagonal lashing, etc.) in accordance with the specific transport ve-
hicle.
m
The low-bed trailer must have the necessary number of lashing points with lashing
strength of LC 4,000 daN.
m
The total height and total width must not exceed the maximum permissible dimen-
sions.
m
The ends of lashing chains and straps must be secured to prevent them working
loose and falling down unintentionally!
3.1 Prepare the low-bed trailer
m
The floor of the loading space must always be undamaged, free of oil and mud, dry
(residual moisture is permitted without accumulations of water) and swept clean!
To Next Page
Loading...
Need help?
General
