Dynapac SD2500C - Manual separator fluid spray (o)

D 30 25
Manual separator fluid spray (o)
Used to spray the parts coming into con-
tact with asphalt with a separator emul-
sion.
- Remove the spray (1) from its bracket.
- Build up pressure by actuating the
pump lever (2).
- The pressure is indicated on the ma-
nometer (3).
- Actuate the manual valve (4) to spray.
- On completion of work, secure the
manual spray in its bracket with a lock
(5).
f
Do not spray into open flame or on hot
surface! Danger of explosion!
5
2
1
22
3
4