B 34
7.7 Vibration acting on the entire body
When the machine is used properly, the weighted effective acceleration values at the
driver’s seat of a
w
= 0.5 m/s
2
according to DIN EN 1032 are not exceeded.
7.8 Vibrations acting on hands and arms
When the machine is used properly, the weighted effective acceleration values at the
driver’s seat of a
w
= 2.5 m/s
2
according to DIN EN ISO 20643 are not exceeded.
7.9 Electromagnetic compatibility (EMC)
The following limit values are observed according to the stipulations of the EMC di-
rective 2004/108 CE:
- Interference emission according to DIN EN 13309:
< 35 dB μV/m for frequencies of 30 MHz - 1 GHz measured at a distance of 10 m
< 45 db μV/m for frequencies of 30 MHz - 1 GHz measured at a distance of 10 m
- Interference immunity against electrostatic discharge according to DIN EN 13309
CE (ESD):
The paver finisher did not show any discernible reactions to contact discharges of
± 4 KV and to air discharges of ± 4 KV.
The modifications according to test criterion „A“ are being met, i.e. the paver finish-
er continues to work without malfunction during the test.
A
Electrical or electronic components and their arrangement may only be modified after
written approval by the manufacturer has been obtained.
To Next Page
Loading...
Need help?
General
