EasyManua.ls Logo

Dynapac SD2500C - Recharging the batteries

Dynapac SD2500C
480 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F 81 5
Recharging the batteries
Both batteries must be recharged individually and must be dismantled from the vehi-
cle for this purpose.
f
Always keep batteries upright during transport!
Before and after recharging a battery, always check the electrolyte level in every cell;
if this needs to be topped up, only use distilled water.
m
When recharging batteries, every cell must be opened, i.e. plugs and/or covers must
be removed.
m
Only use commercially available automatic battery chargers according to the manu-
facturer's instructions.
A
Preferably use the slow recharging procedure and adjust the charge current accord-
ing to the following rule of thumb:
Battery capacity in Ah divided by 20 results in the safe charge current in A.

Table of Contents

Related product manuals