F 100 5
5 Cleaning
- Clean all parts coming into contact with paving material.
- Spray contaminated parts with the separator fluid spraying system (o).
m
Before cleaning work with the high pressure cleaner, grease all lube points acc. to
specification.
- Clean the vehicle with water after laying mineral aggregates, lean-mixed concrete,
etc.
m
Do not spray bearing points, electrical or
electronic components with water.
- Remove residual paving material.
m
After cleaning work with the high pres-
sure cleaner, grease all lube points acc. to specification.
f
Danger of slipping! Ensure that all steps
and ladders are free of grease and oil!
To Next Page
Loading...
Need help?
General
