Dynapac SD2500C - 2 Operating substance specifications; 2.1 Drive engine - fuel; 2.2 Drive engine - Lube oil; 2.3 Cooling system

F 114 4
2 Operating substance specifications
2.1 Drive engine - fuel
m
Low-sulphur diesel fuel is prescribed for correct operation of the exhaust-gas treat-
ment system!
The maximum sulphur level must not exceed 15 ppm!
If low-sulphur diesel fuel is not used, the prescribed exhaust values cannot be met
and damage will be caused to the engine and to the exhaust-gas treatment system!
f
Risk of explosion! Never mix diesel fuel with ethanol, petrol or alcohol!
m
Diesel fuel contaminated with water or dirt can cause serious damage to the fuel sys-
tem! Keep fuel and fuel system free of water and impurities!
m
Observe the instructions for fuel recommendations and the specification in the main-
tenance instructions of the engine manufacturer!
2.2 Drive engine - Lube oil
A
(*) = recommended
m
Observe the instructions for lubricant recommendations and the specification in the
maintenance instructions of the engine manufacturer!
2.3 Cooling system
A
(*) = recommended
Atlas Copco Aral BP
Esso /
Exxon
Fuchs Mobil Shell
Paroil E
Emission
Green
(*)
Dynapac AGIP Chevron Caltex Delo Petronas
Coolant
200
(*)
-Antifreeze
Spezial
Extended
Life Coolant
Extended
Life Coolant
Extended
Life Coolant
Frost
G12