B 3
2.1 Vehicle
Construction
The paver finisher has a welded steel frame on which the individual components are
mounted.
The caterpillar drives compensate uneven areas on the ground; the suspension of the
attached screed additionally helps to attain high paving precision.
The continuously adjustable hydrostatic travel drive allows the speed of the paver fin-
isher to be matched to all work conditions.
The operation of the paver finisher is considerably facilitated by the automatic mate-
rial handling system, the independent travel drives and the clearly structured operat-
ing components and controls.
The following extra equipment (option) is available:
o Automatic levelling/slope control system
o Ultrasonic sensors for material transfer (controller)
o Additional cut-off shoe
o Larger working widths
o Automatic central lubrication system for the finisher and/or the screed
o Protective roof / cab
o Additional headlights, warning lamps
o Emulsion spraying system
o Fuelling system
o Camera system
o Asphalt fume control system
o Additional weight (frame)
o 12 volt system
o Further equipment and upgrade options on request
To Next Page
Loading...
Need help?
General
