D 41 19
Driving and stopping the paver finisher
- Set the fast/slow switch (72) to "Hare".
- Set the preselector (15) to mark 10.
- For driving, carefully tilt the drive lever (13) forward or backward according
to the drive direction desired.
- Use the preselector (15) to regulate the speed.
- Carry out steering movements by actuating the steering potentiometer (16).
f
In case of an emergency, press the emergency stop button (10)!
- To stop, set the preselector (15) to "0" and move the drive lever (13) into its centre
position.
To Next Page
Loading...
