EasyManua.ls Logo

Dynapac SD2500C - Points of maintenance; Batteries (1)

Dynapac SD2500C
480 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F 81 4
1.2 Points of maintenance
Batteries (1)
Maintenance of batteries
A
The batteries are factory-filled with the
correct quantity of acid. The fluid level
should come up to the top mark. If re-
quired, top up the battery, but only use
distilled water to do so!
m
The battery terminal clips must be free of
oxide and protected with a special termi-
nal grease.
m
When removing the batteries, always
first remove the negative terminal, en-
suring that the battery terminals cannot
be short circuited.
A
Keep the battery surfaces clean and dry,
use only a damp or antistatic cloth
for cleaning.
m
Do not open batteries without plugs!
A
If the starting capacity is insufficient,
check and possible recharge the batteries.
A
Regularly check the charge of the battery and recharge if necessary.

Table of Contents

Related product manuals