D 30 21
500 watt spotlight (o)
There are two halogen spotlights (2) at
the front of the machine and also at the
back.
f
Always align the working lights to avoid
dazzling the operating personnel or
other road users!
f
Danger of burning! The working lights
get very hot!
Do not touch working lights that are
switched on or hot!
A
When equipped with an electric screed,
it is possible for the lamps to flicker irreg-
ularly during the heating-up phase with
simultaneous operation of 500 watt spot-
lights (o) and illuminated balloon (o).
Preferably only one type of lighting
should be used during the heating-up
phase.
Camera (o)
There is a camera (1) at the front of the
machine and also at the back.
- The camera can be swivelled in
various directions.
A
The pictures are shown in the control pa-
nel display.
A
The position of the camera can be
changed with the magnetic foot.
To Next Page
Loading...
Need help?
General
