Dynapac SD2500C - 12.1 Machine operation without remote control; side board

E 10 69
12.1 Machine operation without remote control / side board
A
The machine can only be driven without
connected remote control if the
corresponding bridge connectors have
been fitted on both sides of the machine.
Side board with mounted remote
bracket:
- Fit bridge connector (1) in the socket
of the remote control and secure with
cap.
- Check that the connection box is
plugged in (2).
Side board removed:
- Fit bridge connector (3) in the socket
of the connection box and secure with
cap.
1
2
3