D 21 16
Menu
"Machine settings
memory"
Menu for saving/retrieving the
machine settings for the spe-
cific construction site.
A
The machine settings for
- paving thickness
- conveyor and
auger speeds
- tamper and vibration
speed
- screed heater setting
can be saved during work breaks / at the end of the working day and retrieved from
the memory when starting up again.
The settings do not have to be set up again.
m
Danger from immediate part movements! Set main function switch (see operating
panel) before loading saved vehicle settings!
A
Settings that have been saved once remain in the memory until they are overwritten
by saving new settings.
Set-up menu -
"Delayed screed start"
Menu for setting the
screed starting delay:
- (1) Delay duration (sec.)
display and adjustment pa-
rameters
A
When the drive lever is de-
flected, the floating function is
activated once the set time
has elapsed.
A
Setting range 0-60 sec.
To Next Page
Loading...
Need help?
General
