10.2.2 Error code series 200
NOTICE!
When using a USB memory stick, it must be formatted using F
AT 16 or FAT
32 as otherwise it will not be detected by the pump. The size of the memory
stick should not be too large as the data volume does not require too much
space and this could result in read errors.
Fault description Cause Remedy
Error 200 Error opening file on USB file system. Check USB stick.
Error 201 Error setting file pointer on USB file system. Check USB stick.
Error 202 Error reading file on USB file system. Check USB stick.
Error 203 Error writing file on USB file system. Check USB stick.
Error 204 Error switching directory on USB file system. Check USB stick.
Error 205 Error creating directory on USB file system. Check USB stick.
Error 206 Error querying file size on USB file system. Check USB stick.
Error 207 Error closing file on USB file system. Check USB stick.
Error 208 Error finding file on USB file system. Check USB stick.
Error 209 Error deleting file on USB file system. Check USB stick.
Error 210 Error in parameter USB import (file size). Check USB stick.
Error 211 Parameter USB import failed (pump key). Check USB stick.
Error 212 Parameter USB import failed (parameter version). Check USB stick.
Error 299 Error initialising USB file system. Check USB stick.
Operational malfunctions / troubleshooting
152417102276 Rev. 5-02.2020
To Next Page
Loading...
Need help?
General
