Epson N6 Series - Page 215

Maintenance 4. Cable
N6 Rev.2 203
(40)
Disconnect the connectors connected to the
LED
board.
Connector: LED_CN1
(41)
Remove the plate
which the control board 1
is fixed.
Hexagon socket head cap bolts: 2-M4×8
(42)
Disconnect the connectors connected to the
control board 1
.
Connector: GS01
B
e careful not to lose the removed plate and
board.
(43)
Disconnect the connectors connected to the
battery board.
Connectors: BAT_CN3, BAT_CN6
You do not need to
disconnect the connectors
of the batter
ies.
(44
)
Remove the J2 cable fixing plate fixed on the
Arm #1.
Hexagon socket head cap bolts: 2-M4×8

NOTE

NOTE