Epson N6 Series - Page 217

Maintenance 4. Cable
N6 Rev.2 205
(
50)
Remove the six ground wire terminals.
Cross recessed binding head machine screw:
6-M4×8
(
51)
Remove the
base side plate.
Hexagon socket head cap bolts: 4-M4×8
(52)
Disconnect the connectors and two air tubes
(for cleanroom model: three air tubes)
from the removed base side plate.
Connectors: X11, X12, X010, BR010, Ether1, Ether2, D-sub, SW1
Standard model
Cleanroom model
(53)
Remove the board fixing plate.
Hexagon socket head cap bolts: 2-M3×6