4. Select OK to apply the settings.
Storing a Document in the Polling Send Box
1.
Select Fax Box on the home screen, and then select Polling Send/Board.
2. Select Polling Send.
If the password entry screen is displayed, enter the password to open the box.
3. Tap Add Document.
4. On the fax top screen that is displayed, check the fax settings, and then tap
x
to scan and store the document.
To check the document you stored, select Fax Box > Polling Send/Board, select the box containing the document
you want to check, and then tap Check Document. On the screen that is displayed, you can view, print or delete
the scanned document.
Sending Faxes on Demand (Bulletin Board Box)
If you store a monochrome document in a printer's bulletin board box in advance, the stored document can be
sent upon request from another fax machine that supports the subaddress/password feature.
ere
are 10 bulletin
board boxes in the printer. You can store one document with up to 200 pages in each box. To use a bulletin board
box, at least one box to store a document must be registered beforehand.
Related Information
& “Unregistered Bulletin Board:” on page 250
& “Each Registered Bulletin Board” on page 250
Registering a Bulletin Board Box
You must register a bulletin board box for storing a document beforehand. Follow the steps below to register the
box.
1. Select Fax Box > Polling Send/Board from the home screen.
2. Select one of the boxes named Unregistered Bulletin Board.
Note:
If a password entry screen is displayed, enter the password.
3. Make settings for the items on the screen.
❏ Enter a name in Name (Required)
❏ Enter a subaddress in Subaddress(SEP)
❏ Enter a password in Password(PWD)
4. Make the appropriate settings such as Notify Send Result.
Note:
If you set a password in Box Open Password, you will be asked to enter the password from the next time you open the
box.
Faxing
>
Sending Faxes Using the Printer
>
Various Ways of Sending Faxes
231
To Next Page
Loading...
Need help?
General
