Number of Copies:
Set the number of copies to print.
Binding Margin:
Select the binding position.
Auto Paper Ejection:
Select On to eject paper automatically when printing is stopped during a print job.
2-Sided Printing:
Select On to perform 2-sided printing.
PCL Menu:
Make settings for PCL printing.
Font Source:
Resident:
Select to use a font preinstalled on the printer.
Download:
Select to use a font you have downloaded.
Font Number:
Select the default font number for the default Font Source. e available number varies
depending on the settings you made.
Pitch:
Set the default font pitch if the font is scalable and of xed-pitch. You can select from
0.44 to 99.99 cpi (characters per inch), in 0.01 increments.
is item may not appear depending on the Font Source or Font Number settings.
Height:
Set the default font height if the font is scalable and proportional. You can select from
4.00 to 999.75 points, in 0.25 increments.
is
item may not appear depending on the Font Source or Font Number settings.
Symbol Set:
Select the default symbol set. If the font that you selected in the Font Source and the
Font Source setting is not available in the new symbol set setting, the Font Source and
the Font Number settings are automatically replaced with the default value, IBM-US.
Form:
Set the number of lines for the selected paper size and orientation.
is
also causes a
line spacing (VMI) change, and the new VMI value is stored in the printer.
is
means
that later changes in the page size or orientation settings cause changes in the Form
value based on the stored VMI.
Product Information
>
Settings Menu List
>
General Settings
371