CR Function:
Select the line feed command when printing with a driver from a specic operating
system.
LF Function:
Select the line feed command when printing with a driver from a
specic
operating
system.
Paper Source Assign:
Set the assignment for the paper source select command. When 4 is selected, the
commands are set as compatible with the HP LaserJet 4. When 4K is selected, the
commands are set as compatible with the HP LaserJet 4000, 5000, and 8000. When 5S is
selected, the commands are set as compatible with the HP LaserJet 5S.
PS Menu:
Make settings for PS printing.
Error Sheet:
Select On to print a sheet showing the status when an error occurs during PostScript or
PDF printing.
Coloration:
Select the color mode for PostScript printing.
Binary:
Select On when printing data that contains binary images.
e
application may send the
binary data even if the printer driver setting is set to ASCII, but you can print the data
when this feature is enabled.
PDF Page Size:
Select the paper size when printing a PDF le.
Auto Error Solver:
Select an action to perform when a 2-sided printing error or a memory full error occurs.
❏ On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
❏ O
Displays an error message and cancels printing.
Memory Device Interface:
Make settings to allow access to your memory device.
Memory Device:
Select Enable to allow the printer to access an inserted memory device. If Disable is selected,
you cannot read, print data in the memory device, or save data to the memory device with the
printer.
is
prevents
condential
documents from being removed illegally.
Product Information
>
Settings Menu List
>
General Settings
372
To Next Page
Loading...
Need help?
General
