Epson WF-C5890 Series

Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used,
Wi-Fi connections are disabled.
Network Status:
Wired LAN/Wi-Fi Status:
Displays the printer's network information.
Wi-Fi Direct Status:
Displays the Wi-Fi Direct setting information.
Email Server Status:
Displays the mail server setting information.
Print Status Sheet:
Prints a network status sheet.
e information for Ethernet, Wi-Fi, Wi-Fi Direct, and so on is printed on two or more pages.
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Device Name:
Changes the device name to any name within 2 to 53 characters.
TCP/IP:
Congures
the IP settings, if the IP address is static.
For automatic conguration, use the IP address assigned by DHCP.
To set manually, switch to "Manual" and then enter the IP address you want to assign.
Proxy Server:
Set this if you are using a proxy server in your network environment and want to set it for the
printer as well.
Email Server:
Set up the email server information and test connections when using the email forwarding
feature.
IPv6 Address:
Sets whether or not to enable IPv6 addressing.
MS Network Sharing:
Set this when you want to use the le sharing feature.
Product Information > Settings Menu List > General Settings
375