Registering Destinations to Contacts
You can register up to 200 destinations to the contacts list in total.
Registering a Destination to Contacts from Web Cong
1. Enter the printer's IP address into a browser to access Web
Cong
.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Scan/Copy or Fax tab > Contacts
4. Select the number that you want to register, and then click Edit.
5.
Enter Name and Index Word.
6. Select the destination type as the Type option.
Note:
You cannot change the Ty pe option aer registration is complete. If you want to change the type, delete the destination
and then register again.
7. Enter a value for each item, and then click Apply.
Related Information
& “Scanning Originals to a Network Folder” on page 210
& “Scanning Originals to an Email” on page 212
& “Default Value of the Administrator Password” on page 19
Preparing the Printer and Making Initial Settings
>
Preparing and Setting Up the Printer Accordin
…
89
To Next Page
Loading...
