Electrical Characteristics
MFR4310 Reference Manual, Rev. 2
246 Freescale Semiconductor
A.1.10 Supply Currents
All measurements are done without output loads. Unless otherwise noted, the currents are measured with
internal voltage regulator enabled and a 40 MHz oscillator, in standard Pierce mode. Production testing is
performed using a square wave signal at the EXTAL input.
Table A-8. Supply Current Characteristics
Conditions are shown in Table A-4 unless otherwise noted
Num C Rating Symbol Min Typ Max Unit
1 P Run supply currents
Internal regulator enabled
-40°CI
DD5
--50mA
25°C--50
140°C--50
To Next Page
Loading...