5 Tools
218
Tools
5
îš„Change Settings
Displays the [Edit Recipient] screen, which allows you to check or change the selected
recipient.
For information on the [Edit Recipient] screen, refer to "5 Scan" in the User Guide.
îš„Encryption
Set whether to enable or disable the encryption feature.
Note • To enable encryption, select [On] before specifying an address. [On] will be disabled after an
address is specified.
îš„Digital Signature
Select whether to enable or disable the digital signature feature.
îš„File Format
Select an output file format. Clicking [Details...] displays the [File Format] screen.
For information on the [File Format] screen, refer to "5 Scan" in the User Guide.
îš„Resend Attempts
Set whether to try again if a transmission fails. If you select [On], also set [Resend Attempts]
and [Resend Interval (Seconds)].
- Resend Attempts
Set the transmission retry count in the range of 1 to 5.
- Resend Interval (Seconds)
Set the transmission retry interval in the range of 30 to 300 seconds.
Transfer via FTP (1), Transfer via FTP (2) (ApeosPort Series Models Only)
Transfer via FTP (2) will appear when Transfer via FTP (1) is configured.
Specify where FTP forwarding is to be stored.
îš„Address Book
When the server address is registered in Address Book, you can specify the address from
Address Book. The specified address appears in the [Transfer via FTP] screen.
For information on Address Book, refer to "Add Address Book Entry" (P.220).
îš„File Format
Specify an output file format.
For information on file formats, refer to "5 Scan" in the User Guide.
îš„Resend Attempts
Set whether to try again if a transmission fails. If you select [On], also set [Resend Attempts]
and [Resend Interval (Seconds)].
z
Resend Attempts
Set the transmission retry count in the range of 1 to 5.
z
Resend Interval (Seconds)
Set the transmission retry interval in the range of 30 to 300 seconds.
îš„Clear
Deletes all information for the selected address.
îš„Enter Details
Select one of [Name], [Server], [Save in], [User Name], and [Password] and select [Enter
Details], to display an input screen.
The numbers of characters you can input are as follows.
z
Recipient Name: Up to 36 characters
z
Server: Up to 64 characters
z
Save in: Up to 128 characters
z
User Name: Up to 32 characters
z
Password: Up to 32 characters
To Next Page
Loading...
Need help?
General
