Error Code
455
Problem Solving
14
112-700
O [Cause] The finisher's punch waste container is full.
[Remedy] Empty the punch waste container.
For more information on how to empty the punch waste
container, refer to "Emptying the Punch Waste Container
(for Finisher-C1 or Finisher-C1 with Booklet Maker)"
(P.66).
116-220
O [Cause] Failed to move to the Download mode.
[Remedy] Contact our Customer Support Center.
116-324
O O O O O O [Cause] An error occurred on the machine.
[Remedy] If an error occurred while printing, turn off the machine
once, then hold down both the <Start> and <Stop> buttons
simultaneously for 6 seconds when turning the machine
back on. This will delete the print data which caused the
error. If the error was caused by other reasons, turn the
machine off and on. If the problem persists, contact our
Customer Support Center.
116-700
O [Cause] Memory is insufficient for Image Extension Kit.
[Remedy] Specify Normal for the image quality.
116-701
O O [Cause] Unable to use the 2-sided printing feature due to
insufficient memory.
[Remedy] Add memory.
116-702
O [Cause] A print job was processed using a substitute font.
[Remedy] Check the print data.
116-703
O [Cause] An error occurred during PostScript (optional) processing.
[Remedy] Either check the print data, or click [Spool Settings] on the
[Details] tab in the print driver to set bi-directional
communication to off.
116-710
O [Cause] A probable cause is that the correct document size could
not be judged as the receive data exceeded the HP-GL/2
spool size.
[Remedy] Increase the size assigned to HP-GL/2 auto-layout
memory.
116-713
O [Cause] The job was divided to be printed due to insufficient disk
space.
[Remedy] Remove unnecessary data from the hard disk to increase
free disk space.
116-714
O [Cause] An HP-GL/2 command error occurred.
[Remedy] Check the print data.
116-720
O [Cause] An error occurred during print processing due to
insufficient memory.
[Remedy] Stop unnecessary ports or remove unnecessary data from
the hard disk, to increase free disk space.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
To Next Page
Loading...
Need help?
General
