Fujitsu PRIMERGY RX100 S8 - Installing a Memory Module; Preliminary Steps; Selecting the Memory Slot

RX100 S8 Upgrade and Maintenance Manual 207
Main memory
10.2 Installing a memory module
10.2.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 64
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 45
Ê "Disconnecting the server from the mains" on page 46
Ê "Getting access to the component" on page 47
10.2.2 Selecting the memory slot
Ê Choose the memory slot according to the configuration rules in "Basic
information" on page 204.
10.2.3 Installing a memory module
Figure 141: Opening the securing clips
Ê Press the securing clips on both sides of the memory slot concerned
outward.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less