Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

28 Upgrade and Maintenance Manual RX100 S8
Before you start
2.4 Documents you need at hand
Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I – Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com under Industry standard servers.
For the Japanese market please use the following address:
http://jp.fujitsu.com/platform/server/primergy/manual/
Phillips
PH1 / (+) No. 1
UFM nylon
screw
M3 x 4.5 mm
(white)
C26192-Y10-C151
Phillips
PH1 / (+) No. 1
TFM module
M2.5 x 4 mm
(silver)
C26192-Y10-C103
Document Description
"Quick Start Hardware -
FUJITSU Server PRIMERGY
RX100 S8" leaflet
Quick installation poster for initial operation,
available online
"ServerView Quick Start Guide"
" ServerView クイックスタート
ガイド " for the Japanese
market
Information on initial server setup and
software configuration, available online
Table 3: Documentation you need at hand
Screw driver/
bit insert
Screw Usage Type
Table 2: List of used screws (not applicable for the Japanese market)

Fujitsu PRIMERGY RX100 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX100 S8
Category	Server
Language	English