Fujitsu PRIMERGY RX100 S8 - Replacing the ODD; Preliminary Steps; Removing the Defective ODD; Installing the New ODD

230 Upgrade and Maintenance Manual RX100 S8
Optical disk drive
12.4 Replacing the ODD
12.4.1 Preliminary steps
Ê "Locating the defective server" on page 43
Ê "Removing backup and optical disk media" on page 66
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 45
Ê "Disconnecting the server from the mains" on page 46
Ê "Getting access to the component" on page 47
12.4.2 Removing the defective ODD
Ê Remove the ODD as described in section "Removing the ODD" on
page 227.
12.4.3 Installing the new ODD
Ê Install the ODD as described in section "Installing the ODD" on page 225.
12.4.4 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 55
Ê "Switching on the server" on page 57
Ê "Enabling BitLocker functionality" on page 84
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Tools: Torx Plus 6 screw driver