RX100 S8
Upgrade and Maintenance Manual 229
Optical disk drive
12.3.3 Installing the dummy cover
Figure 165: Installing the ODD latch to the dummy cover
Ê Insert the ODD latch in the dummy cover (1).
Ê Fasten the ODD latch with two screws to the dummy cover (2).
Figure 166: Installing the dummy cover
Ê Push the dummy cover inward until it engages at the right side.
12.3.4 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 55
Ê "Switching on the server" on page 57
Ê "Enabling BitLocker functionality" on page 84
Ê "Verifying and configuring the backup software solution" on page 76