210 Upgrade and Maintenance Manual
RX100 S8
Main memory
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 45
Ê "Disconnecting the server from the mains" on page 46
Ê "Getting access to the component" on page 47
Ê "Locating the defective component" on page 45
10.4.2 Removing the defective memory module
Ê Remove the memory module as described in section "Removing a memory
module" on page 209.
10.4.3 Installing the new memory module
Ê Install the memory module as described in section "Installing a memory
module" on page 207.
10.4.4 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 55
Ê "Updating or recovering the system board BIOS and iRMC" on page 70
Ê "Enabling replaced components in the system BIOS" on page 79
Ê "Verifying the memory mode" on page 80
Ê "Enabling SVOM boot watchdog functionality" on page 78
Ê "Switching on the server" on page 57
Ê "Enabling BitLocker functionality" on page 84
To Next Page
Loading...
