GE Datex-Ohmeda S/5 - Hemodynamic Patient Simulators

Planned maintenance instructions
3
Document no. M1125633-06
NOTE: * Ensure that the calibration gas and regulator are functioning properly before
calibration. Perform annual maintenance on the regulator as required. For more information
see section “Adjustments and calibrations” in Compact Airway Modules slot in E-Modules
Technical Reference Manual.
1.2.1 Hemodynamic patient simulators
The following tables present the patient simulators’ compatibility with each hemodynamic
module, and the accessories needed:
Table 1 Patient simulators’ compatibility with hemodynamic modules
E-COP, E-COPSv C.O. Catheter cable 16590
E-COPSv SvO
2
simulator 890121
EEG Module, E-EEG Earphones
EEG simulator 90502
BIS Module, E-BIS BIS simulator or
BIS Sensor simulator
900509
900508
E-ENTROPY Simulator for E-ENTROPY N-ES
Entropy sensor cable 8002964
E-NMT NMT simulator 871251
NMT ElectroSensor 888416
NMT sensor cable 888415
E-MEM MemCard – Menu
MemCard – Data 887045 (English)
All E-Modules Torx screwdrivers; T8, T10
Module Parameter
Patient simulator
M1010831 MedSim 874027
E-PSM(P), E-PRESTN ECG Cable included Multilink ECG acc. Not compatible
T 402015-004 402015-004 and
M1010832
InvBP Cable included M1010858
For product(s) Tool Order No.
ECG