S/5
TM
8-Module Frame, F-CU8 -12
27
Document no. M1125635-05
3.3.5 Replacing the fuses
CAUTION Use only fuses with specified type and ratings.
Reassemble in reverse order.
When reconnecting the fuse holder, check that it locks up properly.
To replace the primary fuses
1. Use a flat blade screwdriver to pull out the fuse
holder located beneath the power supply socket.
2. Replace the fuses.
When reconnecting the fuse holder, check that it locks
up properly.
To replace the secondary fuse
1. Remove the rear panel of the power supply unit by
removing the four screws.
2. Remove the fuse holder by releasing the lock with
a flat blade screwdriver.
3. Replace the fuse.
To Next Page
Loading...
