GE Datex-Ohmeda S/5 - Connectors and Signals; DVI-I Connector

CPU Board and Software Licenses
7
Document no. M1125637-04
2.4 Connectors and signals
2.4.1 DVI-I connector
DVI-I connector X2 Pin Signal Description
1 TX2- Differential data to display
2TX2+
3 2/4_SHIELD Shield for data pairs 2 & 4
4 TX4+ Differential data to display
5TX4-
6 DDC_CLOCK PU 2k +5V
7 DDC_DATA PU 2k +5V
8 ANA_VSYNC Vertical sync for analog display
9 TX1- Differential data to display
10 TX1+
11 1/3_SHIELD Shield for data pairs 1 & 3
12 TX3- Differential data to display
13 TX3+
14 +5V_OUT +5V supply to display
15 GND
16 HP_DET HotPlug detection
17 TXD0- Differential data to display
18 TXD0+
19 0/5_SHIELD Shield for data pairs 0 & 5
20 TX5- Differential data to display
21 TX5+
22 CLK_SHIELD Shield for CLK pair
23 CLK+ Differential CLK to display
24 CLK-
C1 ANA_RED Red, Green and Blue for analog
display
C2 ANA_GREEN
C3 ANA_BLUE
C4 ANA_HSYNC Horizontal sync for analog display
C5 ANA_RETURN Return ground for analog interface
18
17 24
C1 C2
C3 C4
C5