GE Datex-Ohmeda S/5 - Figure 12 F-CU5 Parts Connected with Cables; Figure 13 Two F-Cu5 S Connected to One F-CPU; Mounting the Frame

System installation
29
Document no. M1137263-04
Figure 12 F-CU5 parts connected with cables
Figure 13 Two F-CU5s connected to one F-CPU
3.4.1 Mounting the Frame
The various mount options and connecting cables allow you to install the F-CU5(P) 5-Module
Frame, F-CPU Central Processor Unit and N-AC Power Unit either in one package or separately.
You can, for example, attach the Central Processor Unit and Power Unit to the wall or table leg
and have the Central Unit at hand.
There are different interconnecting cable options available:
F-CPU Power Cable 0.4 m/16 inch and 2.7 m /9 ft
F-CPU Signal Cable 0.3 m/12 inch, 3m/10 ft and 10m/33 ft
F-CU5(P)
F-CPU
N-AC
F-CPU signal cable
F-CPU power cable
Power cord