GE Datex-Ohmeda S/5 - DIS Module Specific Page

Service Menu
69
Document no. M1137266-02
4.16.4 DIS Module specific page
Service Data
Product name: DIS module name.
Product type: DIS module type.
Driver sw id: DIS module software and its release
date.
Short product name: DIS module name in monitor
menu (
Monitor Setup – Interfacing) selection list
(max. 6 characters).
Module serial number: DIS module serial number.
HW card type: PCB type.
HW id: DIS module PCB identification number.
HW test date: DIS module PCB testing date.
Unit serial number: DIS module PCB serial
number.
Comment field: Indicates the status of the external device.
bus voltage: DIS bus voltage, measured by UPI4(NET) board. The value should normally be within 6…8 V.
tout: DIS module timeouts, seen by the monitor. The value should not increase more than by 5 per second.
cse: DIS module checksum errors, seen by the monitor. The value should not increase more than by 5 per
second.
rx: The number of data packets from the external device received by the DIS module.
rx err: The number of data errors from the external device received by the DIS module.
tx: The number of data packets to the external device sent by the DIS module.
Ram: Status of DIS module RAM memory.
Rom: Status of DIS module ROM memory.
EEPROM: Status of DIS module EEPROM memory.