GE Datex-Ohmeda S/5 - Power Unit, N-AC and Central Unit, F-CPU

Datex-Ohmeda S/5 Anesthesia and Critical Care Monitors
14
Document no. M1125636-05
2.5.2 Power Unit, N-AC and Central Unit, F-CPU
Figure 13 External connections, N-AC and F-CPU
(1) Connector for Central Processor Unit, F-CPU
(2) Equipotential connector
(3) Receptacle for power cord
(4) Identification plug (B-UPI4NET)
(5) Direct ECG output (B-UPI4NET)
(6) Connector for the S/5 Device Interfacing Solution, DIS (B-UPI4NET)
(7) RS-232 output (B-UPI4NET)
(8) Parallel printer port (B-UPI4NET)
(9) Connectors for two F-CU5(P) 5-Module Frames
(10) Connector for Power Unit, N-AC
(11) Network connector (B-CPU6)
(12) Display connector (B-CPU6)
(13) Connector for Command Bar, Remote Controller, anesthesia record keeping solution
keyboard and 12” LCD display, D-LCC12
(14) Service reset button
(15) Connector for secondary Command Bar, Remote Controller, anesthesia record keeping
solution keyboard and 12” LCD display, D-LCC12 (Optional Display Controller, B-DISPX)
(16) Display connector for secondary display (Optional Display Controller, B-DISPX)
NOTE: For a more detailed description of the connectors, please see the following slots in this
manual: the “CPU Board, B-CPU6” slot, the “UPINET Board, B-UPI4NET” slot and the “Displays
and Display Controllers” slot about optional Display Controller Board, B-DISPX.
1 2 3 4 5 6 7
8 9
10
11
14
15
16
12
13