System installation
21
Document no. M1137263-04
3 System installation
3.1 Unpacking instructions
1. Confirm that the packing box is undamaged. If the box is damaged, contact the shipper.
2. Open the top of the box and carefully unpack all components.
3. Confirm that all components are undamaged. If any of the components are damaged,
contact the shipper.
4. Confirm that all components are included. If any of the components are missing, contact
your GE Healthcare distributor.
3.2 Choosing location
Consider the following aspects:
• lighting
• space
• connections
• electromagnetic and radio frequency interference, see Appendix B. ElectroMagnetic
Compatibility
• environment
The F-CU8 should be placed so that liquid is prevented from entering the casing.
WARNING The monitor or its components should not be used adjacent to or stacked
with other equipment. If adjacent or stacked use is necessary, the monitor
and its components should be observed to verify normal operation in the
configuration in which it will be used.
CAUTION The monitor display is fragile. Ensure that it is not placed near a heat source or
exposed to mechanical shocks, pressure, moisture, or direct sunlight.
To Next Page
Loading...
