Datex-Ohmeda S/5 Anesthesia and Critical Care Monitors
2
Document no. M1125637-04
1Specifications
Electrical requirements
Interruptibility Data memory and alarm settings are saved during power
failures up to 15 minutes
Environmental requirements
Operating temperature 10...35 °C / 50...95 °F
Storage temperature -10...+50 °C / 14...122 °F
Atmospheric pressure 660...1060 hPa (660...1060 mbar)
Humidity 10...90% non-condensing
1.1 Integrated Ethernet Controller
Meets IEEE802.3 specifications (10BASE-T)
Hospital grade approved data transformer
Coding element interface
1.2 Integrated Display Controller
Output data
VGA resolution
Resolution 640 × 480 pixels
Frame frequency 60 Hz
Scan frequency 31.6 kHz
Dot frequency 25 MHz
Sync polarity H/negative, V/negative, level TTL
Sync pulse:
SVGA resolution
Resolution 800 × 600 pixels
Frame frequency 60 Hz
Scan frequency 37.9 kHz
Dot frequency 40 MHz
Sync polarity H/positive, V/positive, level TTL
Sync pulse:
Horizontal Vertical
Front porch 0.624 µs 0.38 ms
Sync pulse 3.52 µs 0.062 ms
Back porch 1.968 µs 1.016 ms
Sweep time 31.61 µs 16.63 ms
Horizontal Vertical
Front porch 1 µs 0.027 ms
Sync pulse 3.2 µs 0.105 ms
Back porch 2.2 µs 0.612 ms
Sweep time 26.39 µs 16.67 ms
To Next Page
Loading...
