GE Datex-Ohmeda S/5 - 1 Technical Specifications; General; Upi; NET (Ethernet)

Datex-Ohmeda S/5 Anesthesia and Critical Care Monitors
2
Document no. M1137269-02
1 Technical specifications
1.1 General
Voltages:
− +5 V, 500 mA
− +15 VD, 50 mA + DIS power supply
Voltage and temperature measurement
1.2 UPI
Supports RS485 500 kbps module bus communication
Supports RS422 500 kbps Device Interfacing Solution (DIS) bus communication
Printer port (LPT)
RS232 level communication driven by B-CPU6
Analog signals:
− Direct ECG
− Pressure Out
Digital signals:
− Defibrillation Synchronization
− Nurse Call
1.3 NET (Ethernet)
NOTE: When used together with the B-CPU6 board, the Ethernet portion is handled by the CPU
board.
Meets IEEE802.3 specifications (10BASE-T)
Hospital grade approved data transformer
Coding element interface