GE Datex-Ohmeda S/5 - DIS Interfacing Service Menu; Status Page

Datex-Ohmeda S/5 Anesthesia and Critical Care Monitors
68
Document no. M1137266-02
4.16.2 Status Page
4.16.3 DIS Interfacing service menu
Access via Monitor setup - Interfacing.
The selection Next page is available, if more than 8
DIS modules are connected to the DIS bus
simultaneously.
Interfaces
The menu displays a list of all connected DIS modules
and the statuses of the corresponding external
devices.
If the bus voltage is too low, you cannot add more
devices. ‘DIS module bus voltage low. Do not add
more devices or reduce cable length’ message
appears.
Access via Monitor setup - Install/Service -
Service.
The menu displays submenus for all connected DIS
modules.